BCTVL - A9-4297 EPOXY RESIN
- MSDS: BCTVL
- Manufacturer: HYSOL DIV THE DEXTER CORP
- Product Name: A9-4297 EPOXY RESIN
- National Stock Number: 8010-00N010519
Product Identification
Product ID:A9-4297 EPOXY RESIN
MSDS Date:11/12/1985
FSC:8010
NIIN:00N010519
MSDS Number: BCTVL
Responsible Party
OLEAN, NY 14760
Emergency Phone: 716-372-6300
Info Phone: 716-372-6300
Preparer: JAMES P. HORNBURG
Cage: DO953
Contractor
Telephone: 716-372-6300/6309
Cage: DO953
Ingredients
TALC.ACGIH TLV IS FOR RESPIRABLE DUST
CAS: 14807-96-6
RTECS: VV7720000
Fraction By Weight: 45%
OSHA PEL 20 MPPCF TWA
ACGIH TLV: 2 MG/CUM TWA (1988)
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN:MILD
IRRITATION.INGESTION,INHALATION,EYES:N/K
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:SKIN:WASH WITH SOAP AND WATER AT FIRST
OPPORTUNITY.INGESTION:CALL MD IMMEDIATELY .INHALATION:REMOVE TO
FRESH AIR.SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION)
.EYES:FLUSH W/PLENTY OF H*2O FOR AT LEAST 15 MIN
Fire Fighting
Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CARBON DIOXIDE,FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:CARBON
MONOXIDE,ALDEHYDES.
Accidental Release
Spill Release Procedures:SCRAPE UP,TRANSFER TO METAL CONTAINERS.SOLVENT
MAY BE NECESSARY TO CLEAN UP STICKY RESIDUE,BUT OBSERVE FIRE HAZARD
OF SOLVENT.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT,WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF THE FILLER.
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K .
Work Hygienic Practices:N/K
Supplemental Safety and Health
NOTE:FILLER PARTICLES ARE THOROUGHLY WETTED BY EXPOXY RESIN SO AIRBORNE
EXPOSURE DOES NOT OCCUR UNLESS CURED MATL IS SUBSEQUENTLY
GROUND,MACHINED OR SANDED.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:NIL
Spec Gravity:1.5 (WATER=1)
Evaporation Rate & Reference:>1 (BUTYL ACETATE)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE,HIGH VISCOSITY LIQUID,VERY SLIGHT ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,ALDEHYDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .SOLIDIFY BY MIXING WITH A
PORTION OF HARDENER AND THEN BURY IN APPROVED LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.